Materials

Nylon PA6G

Overview

Kormax Nylon G is modified nylon that has the addition of oil to reduce friction, enhance its wear capabilities, and pressure velocity ratio. Kormax Nylon G has excellent impact strength, toughness wear resistance, and can withstand sustained contact with a wide variety of chemicals. Kormax Nylon G has good load-bearing properties, low coefficient of friction and is self-lubricating. It is available in a wide range of sizes including rods, sheets, tubes, and can be easily machined.

Common Applications

Bearings
Gears
Sheaves
Sliding pads
Wear plates
Wheels and rollers

Key Features

Low coefficient of friction
Excellent sliding properties
Chemical and thermal resistance
Good UV resistance
Cast rod available from 150mm and greater
High strength, wear and impact resistance

Material Profile

Profile
Size Range
Metric Size Range (mm)
Availability
Rod
See Size Range
50 to 300
NZ Only
Sheet
See Size Range
10 to 100
NZ Only
Diameter (mm)
Weight (Kg/MTR)
Colour
Colour 2
50
2.45
Yellow
-
60
3.50
Yellow
-
65
4.10
Yellow
-
70
4.70
Yellow
-
75
5.50
Yellow
-
80
6.20
Yellow
-
90
7.80
Yellow
-
100
9.60
Yellow
-
110
11.90
Yellow
-
120
14.00
Yellow
-
130
16.20
Yellow
-
150
21.60
Yellow
-
160
25.50
Yellow
-
180
31.30
Yellow
-
230
52.00
Yellow
-
250
60.70
Yellow
-
300
87.50
Yellow
-
T (mm)
Weight (Kg/MTR)
Colour
Colour 2
10
12.80
Yellow
-
12
15.36
Yellow
-
15
19.20
Yellow
-
20
24.40
Yellow
-
25
30.56
Yellow
-
35
43.20
Yellow
-
40
48.60
Yellow
-
50
59.20
Yellow
-
60
76.50
Yellow
-
80
101.00
Yellow
-
100
126.00
Yellow
-

Dimensional Tolerances

Rod
Diameter Tolerances
50 mm to 90 mm +0.3 mm to +3.2 mm
100 mm to 160 mm +0.6 mm to +4.2 mm
160 mm+ +1.1 mm to +12 mm
Sheet
Thickness Tolerances
10 mm to 25 mm +0.2 mm to +3 mm
30 mm to 50 mm +0.5 mm to +3 mm
60 mm to 100 mm +0.5 mm to +5 mm

Mechanical Properties

Material Metric Values Imperial Values
Tensile Strength at Break 50 N/mm² 7200 psi
Yield Strength 70 N/mm² 10000 psi
Elongation at Yield 10% 10%
Hardness M82 MPA M82 MPA

Thermal Properties

Thermal Properties Temperature
Melting Point 220°C
Maximum Service Temperature 100°C

Resources

Data Sheet

Nylon PA6G Data Sheet

PDF (112 KB)

https://www.kormax.com/wp-content/uploads/2022/11/Nylon-PA6G-Data-Sheet-Updated-6_10.pdf

Polymer Properties Chart

PDF (100 KB)

Download Our Plastics Book Here

Complete range of Kormax Thermoplastic Polymers for New Zealand industries.

This field is for validation purposes and should be left unchanged.

Quality Management

Quality materials, delivered to standard.

Kormax is ISO certified for ISO 9001, ISO 14001, and ISO 45001.
All Kormax products come with batch certifications.

Related Products

Nylon PA6

Kormax Nylon [technical name Polyamide] is one of the most widely used engineering plastic materials due to its excellent wear and bearing properties. Due to the way nylon shapes are manufactured, a vast array of shapes, sizes and grades are available. Kormax Nylons are frequently used to replace metals and other materials and can be a cost effective alternative. Kormax Nylons have extremely good wear resistance, high tensile strength, high impact resistance and good chemical resistance against many harsh chemicals. Compared to some metals, nylon can be up to 80% lighter.

Nylon Max – PA6MG

Kormax Nylon Max is a modified nylon that has embedded molybdenum disulfide lubricant (MoS2). It enhances the nylon’s load-bearing and wear capabilities. Kormax Nylon Max has excellent impact strength, toughness, wear resistance and can stand sustained contact with a wide variety of chemicals. Kormax Nylon Max has a low coefficient of friction, is self-lubricating and is a high-performing alternative to Kormax Nylon.